Metal Sanders and Deburring Machines

Landmark partered with Timesavers, which has more than 70 years experience in manufacturing sanding machinery. The metal sanders and deburring machines are fully customizable and built to perfectly suit your needs. Different applications require different approaches, and nobody offers a wider variety of solutions than Timesavers. Regardless of how large or demanding your metalworking projects are, it’s imperative to find the best machines for each job. And to do so, you need the freedom to choose the exact features (including the number of heads, type of heads, wet-vs-dry, abrasives, etc.) that your new sanders will have.

Deburring

Deburring refers to the process of smoothing the rough edges of a metal object or component. To some, a part is considered deburred when its vertical burr is removed. To others, a part isn’t fully deburred until it has a radius on each edge.

Finishing

Metal finishing refers to the process of altering a material’s surface to enhance its quality and aesthetic. Metal can also be finished to prepare its surface for paint adhesion or achieving a specific micro-inch finish. The most common type of metal finish is a straight-line or grain finish for decorative purposes. In most cases, this process can be accomplished using standard abrasive belts. However, depending on the type of material, the desired result may require a combination of abrasive belts and brush heads.

Slag Removal

Heavy slag is produced during thermal cutting operations, including Oxy-Fuel and Plasma Cutting. However, High Definition Plasma Cutters and Lasers often do not produce enough dross and slag to fall into this category. Bear in mind that the process in which these metal parts are de-slagged is incredibly specific, and the machines involved rarely need to be reconfigured as a result. That’s why all of our slag grinders fall into the same category.

Edge Rounding

Edge rounding can refer to all actions that break the edge of a metal part. However, it is most commonly associated with the creation of a radius to the edge of a part. Rather than simply removing sharpness or deburring, edge rounding breaks a metal component’s edge in order to improve its surface for coating coverage and protect it from corrosion.

Precision Grinding

Grinding with the express goal of removing material and decreasing material variation. This process removes the exterior oxide layer/skin and grinds the material much like a surface grinder – only using a wide belt abrasive.

2020-04-07T00:51:14+00:00

MANUAL GRINDER | DRY

MANUAL GRINDER | DRY A versatile machine with vacuum hold down, and a rotatable head to swap between heavy grinding and edge rounding/deburring. Ideal for metalwork projects that require both deburring and grinding. SPECIFICATIONS Number of Heads: 1 Head Types: Disc/Cup Work Table: 51” x 31” (38” Working Height) Vacuum Area: 12” x 10” 1 HP Abrasive [...]

2020-04-07T00:52:12+00:00

4200 SERIES | ROTARY BRUSH | DRY

4200 SERIES | ROTARY BRUSH | DRY A multi-directional brush machine that uniformly deburrs and finishes the edges of metal parts in a single pass. This process is completely harmless to surface coatings (such as cladding, zinc or laser film). Ideal for deburring the edges of laser-cut, punched or machined metal parts. SPECIFICATIONS Number of Heads: 1-3 [...]

2020-04-07T00:28:46+00:00

2100 SERIES | WET

2100 SERIES | WET Timesavers 2100 Series is available with a single wide belt head in 25" and 37" widths. This machine offers many features of larger single-head wet machines, but with light horsepower and compact design for an economical price for lower production requirements. This machine can be used for metal finishing and deburring. SPECFICIATIONS Number [...]

2020-04-07T00:23:03+00:00

SLAG GRINDER | ALL SERIES | DRY

SLAG GRINDER | ALL SERIES | DRY A robust machine that uses a special head configuration of a hard drum, soft drum and optional brush heads to effortlessly rip through slag. Ideal for heavy slag/dross removal and deburring. SPECIFICATIONS Number of Heads: 2-3 Head Types: Drum, Soft Drum, Brush Machine Widths: 37”, 52” Up to 30 HP [...]

2020-04-07T00:18:42+00:00

1200 SERIES | 25” & 37” WIDE | DRY

1200 SERIES | 25” & 37” WIDE | DRY The 1200 Series machines are economically priced, but deliver all of the same great results that you expect of a larger Timesaver. Available in 25" and 37" widths and in one or two head configurations. Simple operation and controls require only minutes of training for an operator to [...]